The Aerial is placed on a pedestal during

casting. this extra material must be removed.

The Knurled eyes have 4 sprues on the back

side. in most cases they are broken off before

shipping and extra material may remain that

will have to be removed.

As with all resin parts, there will be some additional prep work involved in the construction of your R5 Head.  Some of the pieces require a "MOLD SPRUE" or channel for air flow or support of the part as it is cast within a mold box. These are placed as to not effect the final cosmetic appearance of the part but will need to be removed before painting and or assembly to the dome itself.  In addition to this are the

mounting screw holes that must be plugged during the casting process. These may need to be drilled and tapped depending on your own mounting solution to your R5 Head. These areas are clearly "dimpled" on the ends of the rod castings.

Resinparts.com is proud to now offer the R5-D4 Head Detail pieces! These are cast from the all-metal aluminum masters offered by Wayne Orr at WORRPARTS.COM  with  very kind permission. They can be purchased individually or in a bundle and the price breakdown is as follows:

THREE MAIN KNURLED EYES  - $5.00 USD EACH *15 USD per set.

LARGE REAR ROD  -  $10.00 USD

TWO SIDE PISTONS  - $15.00 USD per set.

AERIAL ANTENNA  - $10.00 USD

SMALL EYES - $2.50 USD each.  *$5.00 USD *set of two.

EXTENDED and SNAP DETAIL -  5.00 USD

ENTIRE HEAD DETAIL BUNDLE $60 USD FOR ALL PIECES.

*shipping costs are determined upon world location.

Using a DREMMEL rotary tool makes quick work of removing extra material from your castings.

GO TO MAIN PAGE!

The area circled in green is a mold sprue and is used during the casting process. It's only purpose is to support the part in a mold box while

being cast. This will need to be removed using a high speed cutter attachment on  DREMMEL tool.

R5-D4 HEAD DETAILS

ADDITIONAL INFORMATION